salut gang
un petit cas personnel sur le véhicule familiale
code p0138 02 bank 1 sensor 2 high voltage
je fait varier mon o2b1s2 voltage dans sont minimum et son maximum avec leak intake et propane et il fonctionne bien
ici data en créant un leak sur l'intake
j'efface mon code va sur la route faire un essai routier
sur la route a 100km/h constant ma valeur est autour de 800mv la je me retrouve avec un pending code p0138 tout de suite
et voici le data
j'ai trouvé un tsb
#SB0066-10R1Some 2010 model year Corolla and Matrix vehicles may exhibit a MIL "ON" condition with one or more of the following Diagnostic Trouble Codes (DTCs):
P2195 - Oxygen (A/F) Sensor Signal Stuck Lean (Bank 1 Sensor 1)
P0138 - Oxygen Sensor Circuit High Voltage (Bank 1 Sensor 2)
P0031 - Oxygen (A/F) Sensor Heater Control Low (Bank 1 Sensor 1)
If ONLY DTC P0138 is present diagnose per the Repair Manual for P0138 (see below).
P0138 Diagnosis:
Inspect the Freeze Frame Data (FFD) values.
If the AFS B1S1 voltage = 3.35 3.70V AND the 02S B152 = 0.70 0.90V the A/F sensor is suspect. Proceed to step 2.
2. Replace the A/F sensor and proceed to step 3 qui est vérifier la dernière calibration ecm et reflash si besoin
moi mes valeur freeze frame sont dans ses valeurs du tsb
alors un remplacement du air fuel ratio sensor s'impose pour en avoir le cœur net