J'ai eu un code P0139 (sans changement de voltage en bas de .3 et en haut de .7 pour 40 secondes) O2 slow réponse B1S2 sur une Civic 2005 1.7. Le problème n'est pas là présentement. Il y a un bulletin concernant une mauvaise interprétation du PCM par rapport à ce code et mon véhicule en fait parti.
Je cherche à savoir, d'après les numéros de calibration dans le pcm, quel serait la plus récente.
Le message du tsb
SOFTWARE INFORMATION
HDS Software Version: 2.008.014 (or later)
NOTE: If you do not use the correct HDS softwareversion,
the HDS mayincorrectly indicate that the
vehicle does not need an update when it actually does.
The updated PGM-FI software program ID and P/N are
shown below. If this, or a later program ID, is the
Current Program ID displayed during the update, the
software for this service bulletin is already installed.
WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.
Failed Part: P/N 37820-PLM-A14
H/C 7828601
Defect Code: 3214
Symptom Code: 03203
Skill Level: Repair Technician
Out of warranty: Any repair performed after warranty
expiration may be eligible for goodwill consideration by
the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a
decision, before starting work.
REPAIR PROCEDURE
Update the PGM-FI software with HDS. Refer to
Service Bulletin 01-023, Updating Control Units/
Modules.
Program ID Program P/N
LMA150 37805-PLM-A15 (or later)
LMA760 37805-PLM-A76 (or later)J'ai
Quelqu'un est au courant ?
J'ai remplacé le O2 mais j'aimerais bien savoir si j'ai bien fais.